What To Expect On The Day Of Combustible Cladding Replacement?

Removing panels can be a very dusty job, so you will need to cover yourself with proper clothing and safety gear first. Inevitably, there are remnants of mortar and bricks flying around. So be sure to wear safety glasses, and if you have asthma, a respirator is a good idea. Special masonry gloves with flock lining and other Combustible Cladding Replacement are also suitable for removing brick liners.

So what happens if your siding is removed at home or work?

Keep all windows in the house closed, keep pets away, do not wash on the clothesline, and remove all covers from patio furniture. We constantly review our safety policies and procedures to provide our customers with the best and safest removal experience.

You will need a diamond chip grinder to cut the edges of the brick-lined wall. It is a good idea to draw the boundaries with chalk first. You should never use a sander above chest level, and if you find that the brick veneer needs to be sanded from a higher height, use a ladder or scaffold.

Once done, use a chisel to remove the first brick-lined veneer. You may find it difficult to remove the first brick, but once you have sloped the grout, you will find it easier to remove the rest of the bricks.

Use a wire cutter to cut the wire netting into a square that can be easily peeled off the wall, and remove any small pieces of mortar that may get caught between the wire when installing brick sheathing. After removing the chicken wire, gently tap the remaining grout on the wall with a small chisel. If the walls are made of wood, be careful not to chisel the wood.

Procedure for Combustible Cladding Replacement

• All removal work begins with the submission of notification documents to the territory's state regulator.
• Start the day by notifying the neighbors and holding our pre-start meeting.
• When working on the exterior of a building, it is essential to place drop sheets so that we do not fall small pieces on the ground.
• After wetting and carefully removing the panel, the frame is unnailed and decontaminated.
• A grout spray is then applied to the frame so that the renovation work can safely continue.
• All workplaces are controlled, and a certificate of authorization is issued.

This is only a brief guide. There are many small steps in between, and this blog covers the most critical steps. However, Cladding Removal costs vary from place to place and also depend upon the work.

Cladding removal is growing in popularity, and many professional companies can handle your panel removal tasks. Many homeowners have found that they cannot bear the sight of brick siding. This is why siding removal with various  Cladding Removal tools is becoming increasingly popular; the fact that it can be up to 5% of your home's value, and you would only have to spend a fraction to remove the siding. Act smart, save money and make a wise decision!